Psychrometrics is the science behind Structural Drying And Dehumidification, and skipping it usually means either under-drying a space or leaving equipment running far longer than necessary.
Our Mission, SD drying plans start with thermal imaging to map exactly where moisture is hiding.

Every Structural Drying And Dehumidification job in Mission, SD starts with psychrometric calculations that determine exactly how much airflow and dehumidification capacity is needed.
Our Mission, SD jobs run commercial LGR equipment sized to the calculated moisture load.
Thermal scans on every Mission, SD job catch moisture a visual inspection alone would miss.
You receive documented daily readings showing the structure actually getting drier.
Below is the calculated, documented process our Mission, SD teams follow.

We calculate temperature, humidity, and grain depression readings to build the drying plan.
Thermal cameras scan walls, ceilings, and flooring to reveal moisture invisible to the naked eye.
Equipment is placed according to calculated airflow paths, not an even spread across the room.
A technician returns daily to take moisture readings and log progress against the drying plan.
Specialty drying protocols protect materials that standard drying speed could damage.
Final verification compares closing readings against the material-specific dry standard, not a general guess.
Tell our Mission, SD dispatcher about the current condition so we can prepare the right diagnostic equipment.
Equipment for psychrometric assessment is standard on every drying dispatch.
We complete the psychrometric assessment and thermal scan, then provide a written drying plan and quote.
A written verification report backs the final sign-off.

"The thermal imaging found moisture behind a wall that looked completely fine from the outside. Would have missed it otherwise." — Julian R.
"They came back every single day to take readings and showed me the numbers improving. Felt like real science, not guesswork." — Monique T.
"Our hardwood floor didn't warp because they slowed the drying process down specifically for it." — Grant P.
Visual appearance doesn't confirm dryness — instrument readings are needed to catch what's not visible.
It's a calculated approach using temperature and humidity data to determine exact equipment needs, rather than guessing.
Typical drying time is 3-5 days for standard materials, longer for sensitive ones like hardwood.
You'll see the actual numbers improve each day through documented logs.
Specialty drying protocols protect hardwood and cabinetry from the damage a standard drying speed could cause.
A stall in the daily logs triggers a plan review rather than simply leaving equipment running unchanged.
Mission is within our core structural drying response zone.

One call starts the psychrometric assessment process.
Call +1-844-833-1325